BRCGS Global Standard for Storage & Distribution

Transport & Delivery: Setting Product-Specific Transport Conditions

Product-specific transport conditions protect product safety, legality and quality from loading to delivery. This guide explains what the BRCGS Global Standard for Storage & Distribution expects, the four steps to control transport and delivery, and the records auditors ask to see.

Requirement overview

What the standard requires for transport and delivery

The BRCGS Global Standard for Storage & Distribution requires procedures that make sure products are transported and delivered under controlled conditions, protecting product integrity, safety, legality and quality throughout the supply chain.

The standard requires procedures for all products so that they are transported under conditions that maintain product safety and integrity.

This applies to ambient, chilled, frozen and temperature-sensitive products, and to deliveries without temperature control, where hygiene and protection from damage remain critical.

Key compliance objectives
✓ Make sure vehicles are suitable and clean before loading
✓ Maintain appropriate product-specific transport conditions
✓ Monitor and document transport temperatures when required
✓ Prevent contamination, damage or spoilage during delivery
✓ Check delivery procedures and traceability at receiving points

Infographic of product-specific transport conditions for BRCGS Storage & Distribution: four steps from defining conditions to receiving checks, plus the records auditors ask for

Step by step

Four steps to control product-specific transport conditions

Work through these steps in order. Each one lists what to put in place and the records that prove it works.

Step 1

Define product-specific transport conditions

What to put in place

✓ Required temperature ranges (for example frozen ≤ -18°C, chilled 0-5°C)
✓ Protection from contamination, cross-contact or damage
✓ Secure loading methods and segregation (for example allergens, chemicals, non-food items)

Evidence to maintain

✓ Product transport requirement specifications
✓ Delivery SOPs for each category (ambient, chilled, etc.)
✓ Equipment calibration and condition reports

Step 2

Verify vehicle and container suitability

What to put in place

✓ Clean, sanitized trailers and containers
✓ Working refrigeration units or insulation (if applicable)
✓ No pests, foreign materials or odors
✓ Suitable for the load type and quantity

Evidence to maintain

✓ Pre-shipment inspection logs
✓ Vehicle cleaning records
✓ Transport suitability checklist

Step 3

Maintain and monitor transport conditions

What to put in place

✓ Continuous or trip-based temperature monitoring
✓ Tamper-evident seals or locking mechanisms
✓ Segregation of allergenic or hazardous goods
✓ Door closure checked before departure

Evidence to maintain

✓ Temperature logs with validation signatures
✓ Seal numbers and security checks
✓ Transport deviation reports and corrective actions

Step 4

Manage delivery and receiving protocols

What to put in place

✓ Cross-check deliveries against purchase and specification sheets
✓ Verify product temperature on arrival
✓ Document condition, integrity and any delivery issues

Evidence to maintain

✓ Delivery verification forms
✓ Receiving temperature and inspection logs
✓ Non-conformance and rejection reports

Avoid nonconformities

Common transport audit findings and how to fix them

No defined temperature specifications for transport

Fix: create and document product-specific transport condition profiles.

Incomplete or missing temperature logs

Fix: use automated or manual monitoring with backup logs.

Dirty or unsuitable delivery vehicles

Fix: set up a vehicle inspection and sanitation protocol.

No seal integrity tracking

Fix: introduce tamper-evident seal logs and shipment ID tracking.

Audit day

Auditor verification checklist

During a BRCGS Storage & Distribution audit, expect to present:

✓ Documented transport and delivery procedures by product type
✓ Vehicle inspection, maintenance and sanitation records
✓ Temperature monitoring logs for chilled and frozen deliveries
✓ Seal integrity logs or other transport security records
✓ Delivery check-in and receiving validation forms

The benefit

Why transport conditions matter

Controlled transport does more than pass the audit:

✓ Protects product integrity and food safety across the supply chain
✓ Prevents spoilage, contamination and legal liability
✓ Supports full traceability and audit readiness
✓ Builds trust with clients, carriers and regulators

Implementation roadmap

From transport requirements to continuous improvement

Phase 1

Build your transport control system

✓ Document transport requirements per product category
✓ Write SOPs for outbound, in-transit and receiving procedures

Phase 2

Train and monitor

✓ Train warehouse, logistics and driver teams on delivery controls
✓ Monitor transport conditions and verify them on receipt

Phase 3

Audit and validate

✓ Run internal reviews of transport records
✓ Carry out route audits or supplier transport checks

Phase 4

Improve continuously

✓ Track delivery issues and root causes
✓ Update SOPs as distribution methods or products change

FAQ

Transport and delivery questions

What does BRCGS Storage & Distribution require for transport?

It requires procedures for all products so that they are transported and delivered under conditions that maintain product safety, integrity, legality and quality.

What should be checked before a vehicle is loaded?

That the trailer or container is clean and sanitized, refrigeration or insulation works where needed, there are no pests, foreign materials or odors, and the vehicle suits the load type and quantity. Record it in pre-shipment inspection logs.

What happens when a delivery arrives?

Cross-check it against the purchase and specification sheets, verify the product temperature, and document its condition, integrity and any issues, with non-conformance and rejection reports where needed.

Related guides

More BRCGS Storage & Distribution guides

Get your transport and delivery controls audit-ready

We provide transport condition SOP templates for ambient, chilled and frozen goods, vehicle inspection and temperature log forms, seal tracking logs and receiving inspection tools, and training kits for warehouse and transport staff.

Book a Free Consultation

Food Safety Systems is an independent consulting provider and is not affiliated with, endorsed by or certified by BRCGS or the British Retail Consortium. BRCGS® is a registered trademark of the British Retail Consortium Trading Ltd. For official requirements, visit www.brcgs.com. Read our disclaimer.

Scroll to Top